Berkland Silicone Paste vs Super Lube 92003: 2026 Comparison

If you've been researching silicone paste, you've likely seen Super Lube 92003 recommended on forums and review sites. It's an NSF H1-certified silicone grease with added PTFE (Teflon) particles — a formulation choice that genuinely matters for certain applications and is irrelevant for others. But customer reviews reveal a quality issue most product recommendations skip over: Super Lube's 3oz squeeze tube has a documented history of breaking, leaving users with grease everywhere and a useless product. If you're looking for a Super Lube 92003 alternative because of the tube quality concerns or because you want pure silicone without PTFE, this guide compares Super Lube to Berkland Silicone Paste — same NSF H1 certification, pure-silicone formulation, and a brush applicator that solves the tube failure problem entirely.

Super Lube 92003 — The PTFE Advantage (and Where It Doesn't Help)

Super Lube 92003 is a silicone-based grease with PTFE (polytetrafluoroethylene, also known as Teflon) particles suspended in the formulation. The PTFE additive provides additional lubricity for sliding metal-on-metal applications — meaning Super Lube performs measurably better than pure silicone paste in specific scenarios.

Where PTFE helps:
- Brake caliper slide pins (the moving parts, not the seal contact)
- Garage door tracks
- Sliding window mechanisms
- Lock cylinders
- Gear teeth at low to moderate loads
- Hinges that need long-lasting lubrication

Where PTFE is irrelevant or counterproductive:
- O-ring lubrication (you don't want particulates in the seal contact area)
- Battery terminal protection (sealing, not lubrication)
- Spark plug boot sealing (sealing, not lubrication)
- Most plumbing applications (sealing, not lubrication)
- Pool equipment seals (you specifically want clean, particle-free silicone)

Super Lube 92003 specs:
- 3 oz squeeze tube
- Silicone (PDMS) + PTFE particles
- Temperature range: -45°F to 450°F
- NSF H1 certified
- Translucent white
- Estimated price: $11.99 ($4.00/oz)

What customers praise: "Good performance," "Easy to apply," "Easy to clean off," "Lasts for many years." The PTFE advantage gets specific mention for caliper applications.

The Tube Quality Problem Super Lube Won't Talk About

When you read Super Lube's negative reviews, the consistent theme isn't about the product chemistry — it's about the packaging. The Helium 10 review data shows multiple distinct negative themes converging on the same root cause:

• "Bad quality tube"
• "Junk"
• "Broken in tube"
• "Thick for caliper slide pins"
• "O ring does not stick" (the PTFE particles preventing proper sealing)
• "Traps air"
• "Pricey"

This is consistent: customers describe the 3oz squeeze tube physically breaking during normal use. When this happens, you have a tube of grease that won't dispense properly, makes a mess, and may have introduced contamination. For a $12 product, the failure mode is frustrating enough that multiple reviewers describe the product as "junk" despite the chemistry being technically sound.

The other notable complaint — "O ring does not stick" — points to the PTFE issue we mentioned above. The PTFE particles that help on sliding parts actually prevent proper seal formation on o-rings. Customers using Super Lube for o-ring applications are using the wrong product for that specific job.

Berkland Silicone Paste — Pure Silicone in a Tub-and-Brush Format

Berkland Silicone Paste 8oz takes a different design approach that addresses both of Super Lube's main customer complaints. It's a pure-silicone formulation (no PTFE) packaged in a tub with a brush applicator built into the lid — eliminating the tube failure mode entirely.

Berkland Silicone Paste 8oz specs:
- 8 oz tub (2.7x the volume of Super Lube)
- 100% silicone (PDMS + silica) — no PTFE particles
- Temperature range: -40°F to 400°F
- NSF H1 certified (same as Super Lube)
- Brush applicator built into the lid
- Made in USA
- Estimated price: $24.99 ($3.12/oz)

Side-by-side comparison:

The key insight: PTFE is an advantage for some applications and a disadvantage for others. If your primary use case is caliper slide pins or sliding mechanisms, Super Lube's PTFE genuinely helps. If your primary use case is sealing (o-rings, plumbing, pool, battery terminals), pure silicone is the better choice.

Choosing Between Super Lube and Berkland

Choose Super Lube 92003 if:
- Your primary use is brake caliper slide pins or other sliding metal-on-metal applications
- You specifically need the PTFE additive for low-friction sliding
- You're willing to accept the documented tube quality risk
- You only need a small quantity for a specific job
- You don't mind paying $4.00/oz for a 3oz tube

Choose Berkland Silicone Paste 8oz if:
- Your primary use is sealing (o-rings, plumbing, pool, battery terminals, spark plug boots)
- You're doing multi-use household and shop applications
- You want to avoid the squeeze-tube failure mode entirely
- You'd prefer brush application over squeeze-tube mess
- You want 2.7x the volume at lower $/oz
- You don't specifically need PTFE-fortified lubrication

For brake caliper work specifically, you can actually use both — Super Lube on the slide pins for the PTFE advantage, Berkland on the caliper piston o-rings for the pure-silicone advantage. They complement each other for that specific application.

What We Recommend

For most silicone paste applications — o-ring lubrication, plumbing, pool equipment, automotive sealing, household maintenance — Berkland Silicone Paste 8oz delivers the same NSF H1 certification in a more reliable format. The tub-and-brush design eliminates Super Lube's documented tube failure mode, and the pure-silicone formulation works better for sealing applications where PTFE particles can interfere with o-ring contact.

Berkland Silicone Paste 8oz — Pure silicone NSF H1 paste with brush applicator, made in USA

• 8 oz tub with brush applicator in the lid (no tube to break)
• $3.12/oz vs Super Lube's $4.00/oz
• Pure silicone (no PTFE) — better for o-rings, plumbing, and pool applications
• Same NSF H1 certification as Super Lube
• Multi-use validated by customer reviews

Buy Berkland Silicone Paste 8oz on Amazon →

If you specifically need PTFE-fortified silicone for caliper slide pins or other sliding mechanical applications, Super Lube 92003 has a real, defensible advantage — just budget for the tube quality risk and handle it gently.

Frequently Asked Questions

Can I use Berkland Silicone Paste for brake caliper work?

Yes, with one nuance. Berkland Silicone Paste is excellent for the o-ring side of caliper work — the piston seals, dust boots, and any sealing contact. For the caliper slide pins specifically (the actual sliding mechanism), a PTFE-fortified product like Super Lube can perform slightly better due to the PTFE's low-friction characteristics. Many mechanics use both — Berkland for the seals, Super Lube for the slide pins. For most casual maintenance, Berkland alone works fine.

What's the issue with the Super Lube tube specifically?

Multiple verified Amazon customer reviews describe the squeeze tube physically breaking during normal use — including phrases like "bad quality tube," "broken in tube," and "junk." This appears to be a packaging design issue rather than a chemistry issue, but it's consistent enough across reviews that buyers should know about it. The tub-and-brush format used by Berkland Silicone Paste eliminates this failure mode entirely.

Does Berkland Silicone Paste work as well as Super Lube for lubricating sliding parts?

For most consumer-grade sliding applications (hinges, locks, garage door tracks, drawer slides), Berkland Silicone Paste works fine. The PTFE additive in Super Lube provides a measurable advantage specifically for high-cycle metal-on-metal sliding applications under load — but most household and DIY uses don't generate enough wear cycles to require it. For caliper slide pins specifically, the PTFE advantage is real. For everything else, pure silicone is sufficient.

Why doesn't Berkland Silicone Paste include PTFE?

Pure silicone is the better choice for the majority of silicone paste applications, which are sealing applications (o-rings, gaskets, plumbing fixtures, pool equipment, battery terminals, electrical connectors). For these applications, PTFE particles can actually interfere — they prevent proper o-ring sealing because the particles disrupt the contact surface. Customer reviews of Super Lube specifically note "O ring does not stick" as a complaint. Berkland's pure-silicone formulation works better for the most common use cases.

Can I use silicone paste with PTFE on food equipment?

Yes — both Super Lube 92003 and Berkland Silicone Paste are NSF H1 certified for incidental food contact. The PTFE additive in Super Lube is FDA-acceptable as a particulate inclusion. Both products are safe for food-equipment seals, brewing equipment, and plumbing fixtures. Choose based on whether you need PTFE for sliding applications or pure silicone for sealin

Related reading:
- Best Silicone Paste in 2026: 7 Products Compared
- Berkland Silicone Paste vs Molykote DC 111
- Berkland Silicone Paste vs Permatex 22058
- How to Use Silicone Paste on O-Rings

Shop this product: Berkland Silicone Paste 8oz on Berkland Goods